E-mail: metalite@sify.com        
 
» ‘Sparkle’ Solar Road Studs
» Solar Arrow Boards
» Nu-Phalt Infra Red Recycling Pot-Hole Repairing
» Clean Enclosed Burners
» OKO-Puncture Free Tyre Sealant
» SINAK Curing Compound for Concrete Structures
» Aqua Clean System
» Relay Patching Compound

  Trans Metalite India Limited
  4417/7, Ansari Road, Daryaganj,
  New Delhi-110 002
  India-

  Phone No: +91-11-23270084
                   +91-11-23272233
                   +91-11-23272725

  Fax No.:
   +91-11-23281696

 
NU-PHALT INFRA RED POT-HOLE REPAIR SYSTEM

We, Trans Metalite India Limited, are the exclusive Indian Associates for Marketing of Infra Red Pot-hole Repair System developed by M/s. Nu-Phalt, UK and we have exclusive manufacturing tie-up in India with M/s. TEXMACO Limited.

Brief write-up on Nu-Phalt-Infra red road repairing system:

As the road infrastructure gets older and vehicular traffic increases, more and more pressure is put on road network, specially for upkeep and maintainance.
Enlarge View
Advantages of Nu-Phalt road repair system over conventional method of road repair are:
Nu-Phalt system does not require any cutting/trimming of the patch repair area into a regular shape, thereby saving on time and cost of repair. Everything that is needed is available on the van itself (including compactor, safety signs, cones, etc) and just 2 persons, i.e. the driver and helper can complete the job of about 5 sq. mtrs. in 30 minutes.
Nu-Phalt system does not require to remove the old asphalt material, thereby, saving on unnecessary disposal of old material.
Nu-Phalt system does not require the presence of a second vehicle to take away the removed asphalt material or to provide new asphalt material. Therefore, lesser road area is blocked while carrying out the repair work. There is less inconvenience to road users, business and householders.
The biggest advantage is substantial improvement in quality of repair work. The Nu-Phalt system allows the surface to be heated to the same temperature at which asphalt leaves the plant. The final outcome is a fully bonded surface between the old and new asphalt with no weak joints. At the same time, this process rejuvenates the old asphalt material.
The process is entirely environment friendly-recycles existing asphalt, reduces noise and exhaust emissions.
 
THE NU-PHALT REPAIR PROCESS (Main Steps Only)
 

The infra-red heater is placed over the patch to be repaired so as to heat at least 4 inches all around the patch.

After heating for about 8 min. the heater is removed and the heated asphalt is disturbed with a spade

Top up the deficient quantity of asphalt with new asphalt mix

Spread the material evenly and compact using a vibratory compactor/mini road roller (Finish Road).

© TRANS METALITE INDIA LIMITED.
All Rights Reserved.
Design by Shrishti Softech
Home : About Us : Introduction : Products : Specifications : Advantages : Video Clips : Contact : Enquiry