E-mail: metalite@sify.com        
 
» ‘Sparkle’ Solar Road Studs
» Solar Arrow Boards
» Nu-Phalt Infra Red Recycling Pot-Hole Repairing
» Clean Enclosed Burners
» OKO-Puncture Free Tyre Sealant
» SINAK Curing Compound for Concrete Structures
» Aqua Clean System
» Relay Patching Compound

  Trans Metalite India Limited
  4417/7, Ansari Road, Daryaganj,
  New Delhi-110 002
  India-

  Phone No: +91-11-23270084
                   +91-11-23272233
                   +91-11-23272725

  Fax No.:
   +91-11-23281696

 
S-102™ CONCRETE CURING
Water Retention
Exceeds the performance criteria (kg/m2)
Standard Criteria S-102™
ASTM C 309 0.55 0.43
AASHTO M148 0.55 0.43
AASHTO M148 0.55 0.34
Moisture Retention Effectiveness Based on Relative Humidity (RH) Data*
*Zachary Department of Civil Engineering, Texas A&M University for Texas DOT
AASHTO T 277-93/ASTM C1202-94
Rapid Chloride Permeability Test (28 Days)
Sample Water Soak S-102™
Total charge (OPC)    
1 (coulombs) 3999 2303
2 (coulombs) 4027 2513
3 (coulombs) 3981 2450
Avg (coulombs) 4002 2422
  100.0% 60.5%
     
Total charge (OPC) 414 411
1 (coulombs) 372 418
2 (coulombs) 435 405
3 (coulombs) 407 411
Avg (coulombs) 100.0% 101.0%
BS 1881: Part 5
Initial Surface Absorption ml/m2/sec (28 Days)
  Water Soak S-102™
10 min 0.07 0.05
30 min 0.06 0.04
1 hr 0.05 0.03
2 hr 0.03 0.02
Abrasion Resistance (ASTM C 501)
Increase in abrasion resistance after
1,000 cycles as measured by:
Wear Index: 38% Improvement
Depth of Wear: 21% Improvement
Scaling Resistance (ASTM C 672)
After 50 freeze-thaw cycles:
  Untreated Control S-102™ Treated
Scaling: Slight to Moderate None
Weight Loss: 1.5% None
Freeze-Thaw Resistance
(AASHTO T 161/ASTM C 666)
  Untreated Control S-102™ Treated
Scaling After:    
146 Cycles Slight None
237 Cycles Slight Slight
480 Cycles Slight Slight
Bond Strength of Epoxy Systems (ASTM C 882 - Shear Strength)
No failure of epoxy bond to S-102™ treated surfaces. (Concrete failed in compression.)

Pull Tests-Epoxy
No failure of epoxy bond to S-102™ treated flat surfaces. (Concrete failed in tension.)

Bond Strength of Urethane Systems(Shear and Tensile)
Withstood 4 to 5 times the stress for the stated movement capability speci- fied by the manufacturer.

We challenge any other Cure Process to match these results!
Flash Point: none; Toxicity: non-toxic;
VOC: contains No volatile organic compounds or solvents.

PRODUCT HANDLING & STORAGE
S-102™ has an indefinite shelf life but must be kept in tightly secured containers to prevent evaporation and contamination.

SINAK S-102™ must be protected from freezing. Product that has frozen will not function as intended.

PRODUCT AVAILABILITY
S-102™ is available in 18.9 Liter pails, 207.9 Liter steel drums and biodegradable 1041 Liter totes through selected, qualified distributors and dealers. Call for the nearest source.

TECHNICAL SUPPORT
Technical assistance is available from the manufacturer, from trained field representatives, and from Certified Applicators.

PRECAUTIONS
This product may attach to certain types of glass, metals, and other materials. See product label or Product Information Sheets for complete application instructions and precautions.

LIMITED WARRANTY
SINAK Corporation warrants its products to be of the highest quality. Since application of the product is a crucial factor in obtaining satisfactory results, and is beyond the control of SINAK Corporation, refund of purchase price or replacement of product shall constitute the limit of SINAK Corporation’s liability. SINAK Corporation makes no other warranties, express or implied, with respect to the products or any service and disclaims all other warranties, including.

PRODUCT DESCRIPTION
SINAK S-102™ is an environmentally friendly, water-based liquid with a proprietary formula in solution. It requires no mixing, diluting or agitating. Color: water clear; Specific Gravity: 1.1; Net Weight per gal: 9.2 lbs; Dry Solids Content (by weight).
© TRANS METALITE INDIA LIMITED.
All Rights Reserved.
Design by Shrishti Softech
Home : About Us : Introduction : Products : Specifications : Advantages : Video Clips : Contact : Enquiry