Video Clips
Transmetalite India Limited Solar Road Studs
solar road studsAbout UsSolar Road studs IntroductionSolar Road Studs SpecificationsAdvantages of Solar Road StudsOther Solar Products for useEnquiryContact , Supplier Solar Road Studs
Solar Road Studs, Smart Solar Road Studs
Smart Solar Road Studs, Solar Road Studs
Specifications of Solar Road Studs
  BODY:
 Made of Aluminium Die Cast Matte Finish (Sand Blasted), conforming to IS 617:1994 Designation  4520. Provided with anti-twist ribs on the bottom anchor, and with embossed raised surface and water  draining channels at top .Compressive strength 179 KN.
 
 TOP COVER :
Made of clear, transparent, anti-static Poly Carbonate material of 4.5mm thickness.
 
 PV MODULE :
Solar PV Module made of high efficiency Crystalline Silicon PV cells of conversion efficiency 13%.
 
 BATTERY :
Ni-MH type of 1.2V
 
 LED :
Ultra Bright LEDs of 5 mm Dia having luminous intensity approx. 6300 mcd. (23 viewing angle). All LEDs covered with the Poly Carbonate covers on the sides. 3 LEDs on one tapering side for Uni-Directional Solar Studs and on two opposite tapering sides of Bi-Directional Solar Studs.
 
 REFLECTOR :
High intensity reflective grade polymer sticker with back
adhesive for additional passive reflection of head light fixed around the LED area.
 
 DIMENSION :
125x 125x 90 mm
 
WATER  PROTECTION :
Tested as per IP 65 in accordance with IS 12063:1987 Category 2 for protection against water ingress.
 
 OPERATING TEMPERATURE :
(-)25degreesC to (+)55degrees C
 
  VISIBILITY :
>800 Meters at clear night conditions (Straight Line)
 
  WEIGHT :
700 +/- 25gms.
 
  OPERATION :
Automatic Dusk to Dawn Solar Switching.
 
 AUTONOMY :
Battery back-up for four (4) No-Sun days.
 
  FLASHING RATE :
Typically 1 Hz.
 
 THERMAL CYCLING TEST :
Tested as per IEC 1215 (between -40 to +85 degrees centigrade) Found be working satisfactorily for 125 hrs.
 
 VIBRATION TEST:
Tested as per QM333
Site is powered by Shrishtisoftech, India